Jetson AGX Orin PCIe C7 issue

Hello,

We need to connect the Jetson AGX Orin PCIe #7 to PCIe 10G NIC, but meet a problem, please refer to the descriptions below:

1. The connections are as below
   
   

a. We have success driver the PCIe 10G NIC on Jetson AGX Xavier platform(PCIe #0)

b. We replaced the Xavier with Orin, and try to enable PCIe #7. But PCIe #7 can’t link to 10G NIC.

c. According to the Orin datasheet, PCIe #7 should be the same as Xavier PCIe #0.

Screenshot from 2023-06-30 11-19-031401×915 110 KB

2. The steps listed below are used to enable the Jetson AGX Orin PCIe #7
   
   a. modified the ODMDATA in p3701.conf.common form "gbe-uphy-config-22,hsstp-lane-map-3,nvhs-uphy-config-0,hsio-uphy-config-0,gbe0-enable-10g" to "gbe-uphy-config-0,hsstp-lane-map-3,nvhs-uphy-config-0,hsio-uphy-config-0
   
   b. disable mgbe in device tree tegra234-ethernet-3737-0000.dtsi
   
   c. enable PCIe #7 in the device tree file tegra234-p3737-pcie.dtsi
   

--- a/cvb/tegra234-p3737-pcie.dtsi

+++ b/cvb/tegra234-p3737-pcie.dtsi

@@ -56,4 +56,12 @@

                phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",

                            "p2u-5", "p2u-6", "p2u-7";

        };

+

+       pcie@141e0000 {

+               status = "okay";

+               num-lanes = ;

+               phys = <&p2u_gbe_0>, <&p2u_gbe_1>, <&p2u_gbe_2>, <&p2u_gbe_3>;

+               phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";

+       };

+

 };

d. kernel logs
dmesg_orin_20230711.log (66.9 KB)