Orin NX boot EL3 eoor when pcie set endpoint

Hi Nvidia,

I following the document to set the ODMDATA.
https://docs.nvidia.com/jetson/archives/r35.4.1/DeveloperGuide/text/SD/Communications/PcieEndpointMode.html#flashing-pcie-as-endpoint-on-a-jetson-orin-nx-nano-series-system

When I set the hsio-uphy-config-41 and reflash.

The system boot in EL3 when flash script in step 3:

▒▒▒▒▒

[0013.552] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5)

[0013.557] I> t234-A01-1-Silicon (0x12347) Prod

[0013.561] I> Boot-mode : BPMP Diagnostic

[0013.565] I> Entry timestamp: 0x00000000

[0013.569] I> last_boot_error: 0x0

[0013.572] I> BR-BCT: preprod_dev_sign: 0

[0013.576] I> rst_source: 0x0, rst_level: 0x0

[0013.580] I> Task: Initialize MB2 params

[0013.584] I> MB2-params @ 0x40060000

[0013.587] I> Task: Crypto init

[0013.590] I> Task: Perform MB1 KAT tests

[0013.594] I> Task: NVRNG health check

[0013.598] I> NVRNG: Health check success

[0013.602] I> Task: Secure debug controls

[0013.605] I> Task: strap war set

[0013.608] I> Task: Program NV master stream id

[0013.613] I> Task: Verify boot mode

[0013.618] I> Task: Alias fuses

[0013.622] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.

[0013.629] I> Task: Print SKU type

[0013.632] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8

[0013.638] I> FUSE_OPT_GPC_DISABLE = 0x00000002

[0013.642] I> FUSE_OPT_TPC_DISABLE = 0x000000f0

[0013.646] I> FUSE_OPT_DLA_DISABLE = 0x00000003

[0013.650] I> FUSE_OPT_PVA_DISABLE = 0x00000001

[0013.655] I> FUSE_OPT_NVENC_DISABLE = 0x00000001

[0013.659] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000

[0013.664] I> FUSE_OPT_FSI_DISABLE = 0x00000001

[0013.668] I> FUSE_OPT_EMC_DISABLE = 0x0000000c

[0013.672] I> FUSE_BOOTROM_PATCH_VERSION = 0x7

[0013.676] I> FUSE_PSCROM_PATCH_VERSION = 0x7

[0013.680] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2

[0013.685] I> FUSE_SKU_INFO_0 = 0xd5

[0013.688] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS

[0013.692] I> FUSE_PACKAGE_INFO_0 = 0x2

[0013.696] I> SKU: Prod

[0013.698] I> Task: Boost clocks

[0013.701] I> Initializing PLLC2 for AXI_CBB.

[0013.705] I> AXI_CBB : src = 35, divisor = 0

[0013.709] I> Task: Voltage monitor

[0013.712] I> VMON: Vmon re-calibration and fine tuning done

[0013.718] I> Task: UPHY init

[0013.721] W> UPHY: UPHY lane info table is empty in MB1 BCT.

[0013.726] I> Task: Boot device init

[0013.730] I> Boot_device: RCM

[0013.733] I> USB configuration success

[0013.736] I> Task: TSC init

[0013.739] I> Task: Enable WDT 5th expiry

[0013.743] I> Task: I2C register

[0013.746] I> Task: Set I2C bus freq

[0013.749] I> Task: Reset FSI

[0013.752] I> Task: Enable clock-mon

[0013.756] I> FMON: Fmon re-programming done

[0013.760] I> Task: Mapper init

[0013.763] I> Task: MB1 fixed firewalls

[0013.769] W> Firewall readback mismatch

[0013.774] I> Task: Load MB2/Applet/FSKP

[0013.778] I> Loading MB2 Applet

[0013.781] I> Slot: 0

[0013.783] I> Binary[21] block-352321536 (partition size: 0x50000)

[0013.789] I> Binary name: MB2-Applet

[0013.793] I> Size of crypto header is 8192

[0013.797] I> Size of crypto header is 8192

[0013.801] I> BCH of MB2-Applet read from storage

[0013.805] I> BCH address is : 0x4004e000

[0013.809] I> MB2-Applet header integrity check is success

[0013.814] I> Binary magic in BCH component 0 is MB2A

[0013.819] I> component binary type is 21

[0013.823] I> Size of crypto header is 8192

[0013.835] I> MB2-Applet binary is read from storage

[0013.840] I> MB2-Applet binary integrity check is success

[0013.845] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40)

[0013.852] I> Task: Prepare MB2 params

[0013.856] I> BR-BCT Boot Chain Fields

[0013.860] I>    u32_non_gpio_select_boot_chain  : 0

[0013.864] I>    u32_num_boot_chains             : 0

[0013.869] I>    bf_bl_gpio_select_boot_chain_1b : 0

[0013.874] I> Task: Misc NV security settings

[0013.878] I> NVDEC sticky bits programming done

[0013.882] I> Successfully powergated NVDEC

[0013.886] I> Task: Disable/Reload WDT

[0013.890] I> Task: Program misc carveouts

[0013.894] I> SLCG Global override status := 0x0

[0013.898] I> MB1: MSS reconfig completed

[0013.902] W> Firewall readback mismatch

[0013.906] W> Firewall readback mismatch

[0013.909] W> Firewall readback mismatch

[0013.913] W> Firewall readback mismatch

[0013.917] W> Firewall readback mismatch

[0013.920] W> Firewall readback mismatch

[0013.924] W> Firewall readback mismatch

[0013.928] W> Firewall readback mismatch

[0013.931] W> Firewall readback mismatch

[0013.935] W> Firewall readback mismatch

I> Applet (version: 0.0.0.0-t234-54845784-8d394889)

I> t234-A01-1-Silicon (0x12347)

I> Emulation:

I> Entry timestamp: 0xffffffff

I> Task: Pinmux init (0x4000062d)

I> Task: Boot device init (0x40001321)

I> Applet do storage init

I> Boot_device: QSPI_FLASH instance: 0

I> Qspi clock source : clk_m

I> QSPI-0l initialized successfully

E> Error in command_complete 18000 int_status

E> OCR failed, error = 39390706

E> Failed to open sdmmc-3, err = 39390706

W> Ignoring init failure for device 0-3

E> Error in command_complete 18000 int_status

E> OCR failed, error = 39390706

E> Failed to open sdmmc-3, err = 39390706

W> Ignoring init failure for device 1-3

E> Unknown device 7

E> Unknown device 8

I> Task: Partition Manager Init (0x40002d61)

W> Cannot find any partition table for 00030000

 > PARTITION_MANAGER: Failed to publish partition.

I> Task: I2C register (0x400006a5)

I> Task: Register exit handlers (0x400005f5)

I> Task: Enter 3p server (0x40001925)

I> USB configuration success

I> Populate chip info

I> RAM_CODE 0x4000021

I> Populate eeprom info

I> Populate eeprom info for module cvm

I> dump bct

I> Rebooting : reboot-recovery





▒▒

[0018.749] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5)

[0018.754] I> t234-A01-1-Silicon (0x12347) Prod

[0018.759] I> Boot-mode : BPMP Diagnostic

[0018.762] I> Entry timestamp: 0x00000000

[0018.766] I> last_boot_error: 0x0

[0018.769] I> BR-BCT: preprod_dev_sign: 0

[0018.773] I> rst_source: 0xb, rst_level: 0x1

[0018.777] I> Task: Initialize MB2 params

[0018.781] I> MB2-params @ 0x40060000

[0018.785] I> Task: Crypto init

[0018.788] I> Task: Perform MB1 KAT tests

[0018.792] I> Task: NVRNG health check

[0018.795] I> NVRNG: Health check success

[0018.799] I> Task: Secure debug controls

[0018.803] I> Task: strap war set

[0018.806] I> Task: Program NV master stream id

[0018.810] I> Task: Verify boot mode

[0018.816] I> Task: Alias fuses

[0018.819] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.

[0018.826] I> Task: Print SKU type

[0018.829] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8

[0018.835] I> FUSE_OPT_GPC_DISABLE = 0x00000002

[0018.839] I> FUSE_OPT_TPC_DISABLE = 0x000000f0

[0018.843] I> FUSE_OPT_DLA_DISABLE = 0x00000003

[0018.847] I> FUSE_OPT_PVA_DISABLE = 0x00000001

[0018.852] I> FUSE_OPT_NVENC_DISABLE = 0x00000001

[0018.856] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000

[0018.861] I> FUSE_OPT_FSI_DISABLE = 0x00000001

[0018.865] I> FUSE_OPT_EMC_DISABLE = 0x0000000c

[0018.869] I> FUSE_BOOTROM_PATCH_VERSION = 0x7

[0018.873] I> FUSE_PSCROM_PATCH_VERSION = 0x7

[0018.877] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2

[0018.882] I> FUSE_SKU_INFO_0 = 0xd5

[0018.885] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS

[0018.889] I> FUSE_PACKAGE_INFO_0 = 0x2

[0018.893] I> SKU: Prod

[0018.895] I> Task: Boost clocks

[0018.898] I> Initializing PLLC2 for AXI_CBB.

[0018.902] I> AXI_CBB : src = 35, divisor = 0

[0018.906] I> Task: Voltage monitor

[0018.909] I> VMON: Vmon re-calibration and fine tuning done

[0018.915] I> Task: UPHY init

[0018.918] W> UPHY: UPHY lane info table is empty in MB1 BCT.

[0018.923] I> Task: Boot device init

[0018.927] I> Boot_device: RCM

[0018.930] I> USB configuration success

[0018.933] I> Task: TSC init

[0018.936] I> Task: Enable WDT 5th expiry

[0018.940] I> Task: I2C register

[0018.943] I> Task: Set I2C bus freq

[0018.946] I> Task: Reset FSI

[0018.949] I> Task: Enable clock-mon

[0018.953] I> FMON: Fmon re-programming done

[0018.957] I> Task: Mapper init

[0018.960] I> Task: MB1 fixed firewalls

[0018.966] W> Firewall readback mismatch

[0018.971] I> Task: Load MB2/Applet/FSKP

[0018.975] I> Loading MB2 Applet

[0018.978] I> Slot: 0

[0018.980] I> Binary[21] block-352321536 (partition size: 0x50000)

[0018.986] I> Binary name: MB2-Applet

[0018.990] I> Size of crypto header is 8192

[0018.993] I> Size of crypto header is 8192

[0018.998] I> BCH of MB2-Applet read from storage

[0019.002] I> BCH address is : 0x4004e000

[0019.006] I> MB2-Applet header integrity check is success

[0019.011] I> Binary magic in BCH component 0 is MB2A

[0019.016] I> component binary type is 21

[0019.020] I> Size of crypto header is 8192

[0019.032] I> MB2-Applet binary is read from storage

[0019.037] I> MB2-Applet binary integrity check is success

[0019.042] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40)

[0019.049] I> Task: Prepare MB2 params

[0019.053] I> BR-BCT Boot Chain Fields

[0019.057] I>    u32_non_gpio_select_boot_chain  : 0

[0019.061] I>    u32_num_boot_chains             : 0

[0019.066] I>    bf_bl_gpio_select_boot_chain_1b : 0

[0019.070] I> Task: Misc NV security settings

[0019.075] I> NVDEC sticky bits programming done

[0019.079] I> Successfully powergated NVDEC

[0019.083] I> Task: Disable/Reload WDT

[0019.087] I> Task: Program misc carveouts

[0019.090] I> SLCG Global override status := 0x0

[0019.095] I> MB1: MSS reconfig completed

[0019.099] W> Firewall readback mismatch

[0019.102] W> Firewall readback mismatch

[0019.106] W> Firewall readback mismatch

[0019.110] W> Firewall readback mismatch

[0019.114] W> Firewall readback mismatch

[0019.117] W> Firewall readback mismatch

[0019.121] W> Firewall readback mismatch

[0019.125] W> Firewall readback mismatch

[0019.128] W> Firewall readback mismatch

[0019.132] W> Firewall readback mismatch

I> Applet (version: 0.0.0.0-t234-54845784-8d394889)

I> t234-A01-1-Silicon (0x12347)

I> Emulation:

I> Entry timestamp: 0xffffffff

I> Task: Pinmux init (0x4000062d)

I> Task: Boot device init (0x40001321)

I> Applet do storage init

I> Boot_device: QSPI_FLASH instance: 0

I> Qspi clock source : clk_m

I> QSPI-0l initialized successfully

E> Error in command_complete 18000 int_status

E> OCR failed, error = 39390706

E> Failed to open sdmmc-3, err = 39390706

W> Ignoring init failure for device 0-3

E> Error in command_complete 18000 int_status

E> OCR failed, error = 39390706

E> Failed to open sdmmc-3, err = 39390706

W> Ignoring init failure for device 1-3

E> Unknown device 7

E> Unknown device 8

I> Task: Partition Manager Init (0x40002d61)

W> Cannot find any partition table for 00030000

 > PARTITION_MANAGER: Failed to publish partition.

I> Task: I2C register (0x400006a5)

I> Task: Register exit handlers (0x400005f5)

I> Task: Enter 3p server (0x40001925)

I> USB configuration success

I> Populate chip info

I> RAM_CODE 0x4000021

I> Populate eeprom info

I> Populate eeprom info for module cvm

I> dump bct

I> Rebooting : reboot-recovery





▒▒

[0104.482] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5)

[0104.487] I> t234-A01-1-Silicon (0x12347) Prod

[0104.491] I> Boot-mode : BPMP Diagnostic

[0104.495] I> Entry timestamp: 0x00000000

[0104.499] I> last_boot_error: 0x0

[0104.502] I> BR-BCT: preprod_dev_sign: 0

[0104.506] I> rst_source: 0xb, rst_level: 0x1

[0104.510] I> Task: Initialize MB2 params

[0104.514] I> MB2-params @ 0x40060000

[0104.518] I> Task: Crypto init

[0104.520] I> Task: Perform MB1 KAT tests

[0104.524] I> Task: NVRNG health check

[0104.528] I> NVRNG: Health check success

[0104.532] I> Task: Secure debug controls

[0104.536] I> Task: strap war set

[0104.539] I> Task: Program NV master stream id

[0104.543] I> Task: Verify boot mode

[0104.549] I> Task: Alias fuses

[0104.552] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.

[0104.560] I> Task: Print SKU type

[0104.563] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8

[0104.568] I> FUSE_OPT_GPC_DISABLE = 0x00000002

[0104.572] I> FUSE_OPT_TPC_DISABLE = 0x000000f0

[0104.576] I> FUSE_OPT_DLA_DISABLE = 0x00000003

[0104.581] I> FUSE_OPT_PVA_DISABLE = 0x00000001

[0104.585] I> FUSE_OPT_NVENC_DISABLE = 0x00000001

[0104.590] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000

[0104.594] I> FUSE_OPT_FSI_DISABLE = 0x00000001

[0104.598] I> FUSE_OPT_EMC_DISABLE = 0x0000000c

[0104.603] I> FUSE_BOOTROM_PATCH_VERSION = 0x7

[0104.607] I> FUSE_PSCROM_PATCH_VERSION = 0x7

[0104.611] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2

[0104.615] I> FUSE_SKU_INFO_0 = 0xd5

[0104.618] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS

[0104.622] I> FUSE_PACKAGE_INFO_0 = 0x2

[0104.626] I> SKU: Prod

[0104.628] I> Task: Boost clocks

[0104.631] I> Initializing PLLC2 for AXI_CBB.

[0104.635] I> AXI_CBB : src = 35, divisor = 0

[0104.640] I> Task: Voltage monitor

[0104.643] I> VMON: Vmon re-calibration and fine tuning done

[0104.648] I> Task: UPHY init

[0104.652] W> UPHY: UPHY lane info table is empty in MB1 BCT.

[0104.657] I> Task: Boot device init

[0104.660] I> Boot_device: RCM

[0104.663] I> USB configuration success

[0104.667] I> Task: TSC init

[0104.670] I> Task: Enable WDT 5th expiry

[0104.674] I> Task: I2C register

[0104.677] I> Task: Set I2C bus freq

[0104.680] I> Task: Reset FSI

[0104.683] I> Task: Enable clock-mon

[0104.687] I> FMON: Fmon re-programming done

[0104.691] I> Task: Mapper init

[0104.694] I> Task: MB1 fixed firewalls

[0104.700] W> Firewall readback mismatch

[0104.705] I> Task: Load MB2/Applet/FSKP

[0104.709] I> Loading MB2 Applet

[0104.712] I> Slot: 0

[0104.714] I> Binary[21] block-352321536 (partition size: 0x50000)

[0104.720] I> Binary name: MB2-Applet

[0104.723] I> Size of crypto header is 8192

[0104.727] I> Size of crypto header is 8192

[0104.732] I> BCH of MB2-Applet read from storage

[0104.736] I> BCH address is : 0x4004e000

[0104.740] I> MB2-Applet header integrity check is success

[0104.745] I> Binary magic in BCH component 0 is MB2A

[0104.750] I> component binary type is 21

[0104.754] I> Size of crypto header is 8192

[0104.765] I> MB2-Applet binary is read from storage

[0104.770] I> MB2-Applet binary integrity check is success

[0104.776] I> Binary MB2-Applet loaded successfully at 0x40000000 (0x41b40)

[0104.783] I> Task: Prepare MB2 params

[0104.786] I> BR-BCT Boot Chain Fields

[0104.790] I>    u32_non_gpio_select_boot_chain  : 0

[0104.795] I>    u32_num_boot_chains             : 0

[0104.799] I>    bf_bl_gpio_select_boot_chain_1b : 0

[0104.804] I> Task: Misc NV security settings

[0104.808] I> NVDEC sticky bits programming done

[0104.813] I> Successfully powergated NVDEC

[0104.816] I> Task: Disable/Reload WDT

[0104.820] I> Task: Program misc carveouts

[0104.824] I> SLCG Global override status := 0x0

[0104.828] I> MB1: MSS reconfig completed

[0104.832] W> Firewall readback mismatch

[0104.836] W> Firewall readback mismatch

[0104.840] W> Firewall readback mismatch

[0104.843] W> Firewall readback mismatch

[0104.847] W> Firewall readback mismatch

[0104.851] W> Firewall readback mismatch

[0104.854] W> Firewall readback mismatch

[0104.858] W> Firewall readback mismatch

[0104.862] W> Firewall readback mismatch

[0104.865] W> Firewall readback mismatch

I> Applet (version: 0.0.0.0-t234-54845784-8d394889)

I> t234-A01-1-Silicon (0x12347)

I> Emulation:

I> Entry timestamp: 0xffffffff

I> Task: Pinmux init (0x4000062d)

I> Task: Boot device init (0x40001321)

I> Applet do storage init

I> Boot_device: QSPI_FLASH instance: 0

I> Qspi clock source : clk_m

I> QSPI-0l initialized successfully

E> Error in command_complete 18001 int_status

E> OCR failed, error = 39390706

E> Failed to open sdmmc-3, err = 39390706

W> Ignoring init failure for device 0-3

E> Error in command_complete 18000 int_status

E> OCR failed, error = 39390706

E> Failed to open sdmmc-3, err = 39390706

W> Ignoring init failure for device 1-3

E> Unknown device 7

E> Unknown device 8

I> Task: Partition Manager Init (0x40002d61)

W> Cannot find any partition table for 00030000

 > PARTITION_MANAGER: Failed to publish partition.

I> Task: I2C register (0x400006a5)

I> Task: Register exit handlers (0x400005f5)

I> Task: Enter 3p server (0x40001925)

I> USB configuration success

I> Populate chip info

I> RAM_CODE 0x4000021

I> Populate eeprom info

I> Populate eeprom info for module cvm

I> dump bct

I> Rebooting : reboot-recovery





▒▒

[0026.080] I> MB1 (version: 1.2.0.0-t234-54845784-562369e5)

[0026.085] I> t234-A01-1-Silicon (0x12347) Prod

[0026.089] I> Boot-mode : Coldboot

[0026.092] I> Entry timestamp: 0x00000000

[0026.096] I> last_boot_error: 0x0

[0026.099] I> BR-BCT: preprod_dev_sign: 0

[0026.103] I> rst_source: 0xb, rst_level: 0x1

[0026.107] I> Task: SE error check

[0026.110] I> Task: Bootchain select WAR set

[0026.114] I> Task: Enable SLCG

[0026.117] I> Task: CRC check

[0026.120] I> Task: Initialize MB2 params

[0026.124] I> MB2-params @ 0x40060000

[0026.128] I> Task: Crypto init

[0026.131] I> Task: Perform MB1 KAT tests

[0026.135] I> Task: NVRNG health check

[0026.138] I> NVRNG: Health check success

[0026.142] I> Task: MSS Bandwidth limiter settings for iGPU clients

[0026.148] I> Task: Enabling and initialization of Bandwidth limiter

[0026.154] I> No request to configure MBWT settings for any PC!

[0026.160] I> Task: Secure debug controls

[0026.164] I> Task: strap war set

[0026.167] I> Task: Initialize SOC Therm

[0026.170] I> Task: Program NV master stream id

[0026.175] I> Task: Verify boot mode

[0026.180] I> Task: Alias fuses

[0026.184] W> FUSE_ALIAS: Fuse alias on production fused part is not supported.

[0026.191] I> Task: Print SKU type

[0026.194] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x000001c8

[0026.200] I> FUSE_OPT_GPC_DISABLE = 0x00000002

[0026.204] I> FUSE_OPT_TPC_DISABLE = 0x000000f0

[0026.208] I> FUSE_OPT_DLA_DISABLE = 0x00000003

[0026.212] I> FUSE_OPT_PVA_DISABLE = 0x00000001

[0026.217] I> FUSE_OPT_NVENC_DISABLE = 0x00000001

[0026.221] I> FUSE_OPT_NVDEC_DISABLE = 0x00000000

[0026.226] I> FUSE_OPT_FSI_DISABLE = 0x00000001

[0026.230] I> FUSE_OPT_EMC_DISABLE = 0x0000000c

[0026.234] I> FUSE_BOOTROM_PATCH_VERSION = 0x7

[0026.238] I> FUSE_PSCROM_PATCH_VERSION = 0x7

[0026.242] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2

[0026.247] I> FUSE_SKU_INFO_0 = 0xd5

[0026.250] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS

[0026.254] I> FUSE_PACKAGE_INFO_0 = 0x2

[0026.258] I> SKU: Prod

[0026.260] I> Task: Boost clocks

[0026.263] I> Initializing PLLC2 for AXI_CBB.

[0026.267] I> AXI_CBB : src = 35, divisor = 0

[0026.271] I> Task: Voltage monitor

[0026.274] I> VMON: Vmon re-calibration and fine tuning done

[0026.280] I> Task: UPHY init

[0026.285] I> HSIO UPHY init done

[0026.288] W> Skipping GBE UPHY config

[0026.291] I> Task: Boot device init

[0026.295] I> Boot_device: RCM

[0026.298] I> USB configuration success

[0026.301] I> Task: TSC init

[0026.304] I> Task: Load membct

[0026.307] I> RAM_CODE 0x4000021

[0026.310] I> Loading MEMBCT

[0026.313] I> Slot: 0

[0026.315] I> Binary[0] block-0 (partition size: 0x40000)

[0026.320] I> Binary name: MEM-BCT-0

[0026.323] I> Size of crypto header is 8192

[0026.327] I> Size of crypto header is 8192

[0026.332] I> BCH of MEM-BCT-0 read from storage

[0026.336] I> BCH address is : 0x40050000

[0026.340] I> MEM-BCT-0 header integrity check is success

[0026.345] I> Binary magic in BCH component 0 is MEM0

[0026.350] I> component binary type is 0

[0026.355] I> MEM-BCT-0 binary is read from storage

[0026.360] I> MEM-BCT-0 binary integrity check is success

[0026.365] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580)

[0026.372] I> RAM_CODE 0x4000021

[0026.377] I> RAM_CODE 0x4000021

[0026.381] I> Task: Load Page retirement list

[0026.385] I> Task: SDRAM params override

[0026.389] I> Task: Save mem-bct info

[0026.393] I> Task: Carveout allocate

[0026.396] I> Update CCPLEX IST carveout from MB1-BCT

[0026.401] I> ECC region[0]: Start:0x0, End:0x0

[0026.405] I> ECC region[1]: Start:0x0, End:0x0

[0026.409] I> ECC region[2]: Start:0x0, End:0x0

[0026.414] I> ECC region[3]: Start:0x0, End:0x0

[0026.418] I> ECC region[4]: Start:0x0, End:0x0

[0026.422] I> Non-ECC region[0]: Start:0x80000000, End:0x280000000

[0026.428] I> Non-ECC region[1]: Start:0x0, End:0x0

[0026.433] I> Non-ECC region[2]: Start:0x0, End:0x0

[0026.437] I> Non-ECC region[3]: Start:0x0, End:0x0

[0026.442] I> Non-ECC region[4]: Start:0x0, End:0x0

[0026.453] I> allocated(CO:43) base:0x27c000000 size:0x4000000 align: 0x200000

[0026.460] I> allocated(CO:39) base:0x279e00000 size:0x2200000 align: 0x10000

[0026.467] I> allocated(CO:20) base:0x276000000 size:0x2000000 align: 0x2000000

[0026.474] I> allocated(CO:24) base:0x274000000 size:0x2000000 align: 0x2000000

[0026.481] I> allocated(CO:28) base:0x272000000 size:0x2000000 align: 0x2000000

[0026.488] I> allocated(CO:22) base:0x278000000 size:0x1000000 align: 0x1000000

[0026.495] I> allocated(CO:35) base:0x279000000 size:0xe00000 align: 0x10000

[0026.502] I> allocated(CO:02) base:0x271800000 size:0x800000 align: 0x800000

[0026.509] I> allocated(CO:03) base:0x271000000 size:0x800000 align: 0x800000

[0026.516] I> allocated(CO:06) base:0x270800000 size:0x800000 align: 0x800000

[0026.523] I> allocated(CO:56) base:0x270000000 size:0x800000 align: 0x200000

[0026.530] I> allocated(CO:07) base:0x26fc00000 size:0x400000 align: 0x400000

[0026.537] I> allocated(CO:33) base:0x26f800000 size:0x400000 align: 0x200000

[0026.544] I> allocated(CO:23) base:0x26f600000 size:0x200000 align: 0x200000

[0026.551] I> allocated(CO:01) base:0x26f500000 size:0x100000 align: 0x100000

[0026.558] I> allocated(CO:04) base:0x26f400000 size:0x100000 align: 0x100000

[0026.565] I> allocated(CO:05) base:0x26f300000 size:0x100000 align: 0x100000

[0026.572] I> allocated(CO:08) base:0x26f200000 size:0x100000 align: 0x100000

[0026.579] I> allocated(CO:09) base:0x26f100000 size:0x100000 align: 0x100000

[0026.585] I> allocated(CO:15) base:0x26f000000 size:0x100000 align: 0x100000

[0026.592] I> allocated(CO:17) base:0x26ef00000 size:0x100000 align: 0x100000

[0026.599] I> allocated(CO:27) base:0x26ee00000 size:0x100000 align: 0x100000

[0026.606] I> allocated(CO:42) base:0x26ed00000 size:0x100000 align: 0x100000

[0026.613] I> allocated(CO:54) base:0x26ec80000 size:0x80000 align: 0x80000

[0026.620] I> allocated(CO:34) base:0x26ec70000 size:0x10000 align: 0x10000

[0026.627] I> allocated(CO:72) base:0x26ea70000 size:0x200000 align: 0x10000

[0026.634] I> allocated(CO:46) base:0x240000000 size:0x20000000 align: 0x20000000

[0026.641] I> allocated(CO:47) base:0x26e600000 size:0x400000 align: 0x200000

[0026.648] I> allocated(CO:48) base:0x26ea50000 size:0x20000 align: 0x10000

[0026.655] I> allocated(CO:69) base:0x26ea30000 size:0x20000 align: 0x10000

[0026.661] I> allocated(CO:49) base:0x26ea20000 size:0x10000 align: 0x10000

[0026.668] I> allocated(CO:50) base:0x26ea10000 size:0x10000 align: 0x10000

[0026.675] I> NSDRAM base: 0x80000000, end: 0x26ea70000, size: 0x1eea70000

[0026.682] I> Task: Thermal check

[0026.685] I> max_chip_limit = 105

[0026.688] I> min_chip_limit = -28

[0026.691] I> max temp read = 50

[0026.694] I> min temp read = 48

[0026.697] I> Task: Update FSI SCR with thermal fuse data

[0026.702] I> Task: Enable WDT 5th expiry

[0026.706] I> Task: I2C register

[0026.709] I> Task: Set I2C bus freq

[0026.712] I> Task: Reset FSI

[0026.715] I> Task: Pinmux init

[0026.718] I> skipped mmio_addr = 0x9240008

[0026.722] I> skipped mmio_addr = 0x9240000

[0026.726] I> skipped mmio_addr = 0x9240010

[0026.730] I> skipped mmio_addr = 0x9240018

[0026.734] I> skipped mmio_addr = 0x9240020

[0026.738] I> skipped mmio_addr = 0x9240030

[0026.742] I> skipped mmio_addr = 0x9240028

[0026.746] I> skipped mmio_addr = 0x9240038

[0026.750] I> skipped mmio_addr = 0x9240040

[0026.754] I> skipped mmio_addr = 0x9240048

[0026.758] I> skipped mmio_addr = 0x9241000

[0026.762] I> skipped mmio_addr = 0x9241008

[0026.765] I> skipped mmio_addr = 0x9241010

[0026.769] I> skipped mmio_addr = 0x9241018

[0026.773] I> skipped mmio_addr = 0x9241020

[0026.777] I> skipped mmio_addr = 0x9241028

[0026.781] I> skipped mmio_addr = 0x9241030

[0026.785] I> skipped mmio_addr = 0x9241038

[0026.789] I> skipped mmio_addr = 0x9241040

[0026.793] I> skipped mmio_addr = 0x9242000

[0026.797] I> skipped mmio_addr = 0x9242008

[0026.801] I> Task: Prod config init

[0026.804] I> Task: Pad voltage init

[0026.808] I> Task: Prod init

[0026.810] I> Task: Program rst req config reg

[0026.815] I> Task: Common rail init

[0026.818] I> DONE: Thermal config

[0026.822] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod.

[0026.831] I> DONE: SOC rail config

[0026.834] W> PMIC_CONFIG: Rail: MEMIO rail config not found in MB1 BCT.

[0026.840] I> DONE: MEMIO rail config

[0026.844] W> PMIC_CONFIG: Rail: GPU rail info not found in MB1 BCT.

[0026.850] I> DONE: GPU rail info

[0026.854] W> PMIC_CONFIG: Rail: CV rail info not found in MB1 BCT.

[0026.860] I> DONE: CV rail info

[0026.863] I> Task: Mem clock src

[0026.866] I> Task: Misc. board config

[0026.870] I> PMIC_CONFIG: Platform config not found in MB1 BCT.

[0026.875] I> Task: SDRAM init

[0026.878] I> MemoryType: 4 MemBctRevision: 1

[0026.885] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 1

[0026.892] I> MSS CAR: Init PLLM

[0026.895] I> MSS CAR: Init PLLHUB

[0026.900] I> Encryption:   MTS: en, TX: en, VPR: en, GSC: en

[0026.911] I> SDRAM initialized!

[0026.914] I> SDRAM Size in Total 0x200000000

[0026.918] I> Task: Dram Ecc scrub

[0026.922] I> Task: DRAM alias check

[0026.931] I> Task: Program NSDRAM carveout

[0026.936] I> NSDRAM carveout encryption is enabled

[0026.941] I> Program NSDRAM carveout

[0026.945] I> Task: Register checker

[0026.951] I> Task: Enable clock-mon

[0026.955] I> FMON: Fmon re-programming done

[0026.960] I> Task: Mapper init

[0026.963] I> Task: SC7 Context Init

[0026.967] I> Task: CCPLEX IST init

[0026.971] I> Task: CPU WP0

[0026.975] I> Loading MCE

[0026.978] I> Slot: 0

[0026.980] I> Binary[8] block-134217728 (partition size: 0x80000)

[0026.987] I> Binary name: MCE

[0026.991] I> Size of crypto header is 8192

[0026.995] I> Size of crypto header is 8192

[0029.308] I> BCH of MCE read from storage

[0029.313] I> BCH address is : 0x4003e000

[0029.318] I> MCE header integrity check is success

[0029.323] I> Binary magic in BCH component 0 is MTSM

[0029.329] I> component binary type is 8

[0029.333] I> Size of crypto header is 8192

[0029.346] I> MCE binary is read from storage

[0029.351] I> MCE binary integrity check is success

[0029.357] I> Binary MCE loaded successfully at 0x40000000 (0x2c880)

[0029.365] I> Size of crypto header is 8192

[0029.370] I> Sending WP0 mailbox command to PSC

[0029.380] I> Task: XUSB Powergate

[0029.383] I> Skipping powergate XUSB.

[0029.387] I> Task: MB1 fixed firewalls

[0029.403] W> Firewall readback mismatch

[0029.414] I> Task: Load bpmp-fw

[0029.417] I> Slot: 0

[0029.420] I> Binary[15] block-251658240 (partition size: 0x180000)

[0029.428] I> Binary name: BPMP_FW

[0029.431] I> Size of crypto header is 8192

[0029.436] I> Size of crypto header is 8192

[0029.441] I> BCH of BPMP_FW read from storage

[0029.446] I> BCH address is : 0x807fe000

[0029.451] I> BPMP_FW header integrity check is success

[0029.457] I> Binary magic in BCH component 0 is BPMF

[0029.462] I> component binary type is 15

[0029.466] I> Size of crypto header is 8192

[0029.519] I> BPMP_FW binary is read from storage

[0029.526] I> BPMP_FW binary integrity check is success

[0029.532] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfea00)

[0029.540] I> Slot: 0

[0029.542] I> Binary[16] block-268435456 (partition size: 0x400000)

[0029.550] I> Binary name: BPMP_FW_DTB

[0029.554] I> Size of crypto header is 8192

[0029.559] I> Size of crypto header is 8192

[0029.564] I> BCH of BPMP_FW_DTB read from storage

[0029.569] I> BCH address is : 0x807fc000

[0029.574] I> BPMP_FW_DTB header integrity check is success

[0029.580] I> Binary magic in BCH component 0 is BPMD

[0029.586] I> component binary type is 16

[0029.590] I> Size of crypto header is 8192

[0029.599] I> BPMP_FW_DTB binary is read from storage

[0029.605] I> BPMP_FW_DTB binary integrity check is success

[0029.611] I> Binary BPMP_FW_DTB loaded successfully at 0x807e31f0 (0x18e00)

[0029.620] I> Task: Load psc-fw

[0029.624] I> Slot: 0

[0029.626] I> Binary[17] block-285212672 (partition size: 0xc0000)

[0029.634] I> Binary name: PSC_FW

[0029.638] I> Size of crypto header is 8192

[0029.642] I> Size of crypto header is 8192

[0029.647] I> BCH of PSC_FW read from storage

[0029.652] I> BCH address is : 0x80ffe000

[0029.657] I> PSC_FW header integrity check is success

[0029.663] I> Binary magic in BCH component 0 is PFWP

[0029.668] I> component binary type is 17

[0029.673] I> Size of crypto header is 8192

[0029.694] I> PSC_FW binary is read from storage

[0029.700] I> PSC_FW binary integrity check is success

[0029.706] I> Binary PSC_FW loaded successfully at 0x80fa4680 (0x59980)

[0029.714] I> Task: Load nvdec-fw

[0029.718] I> Slot: 0

[0029.720] I> Binary[7] block-117440512 (partition size: 0x100000)

[0029.728] I> Binary name: NVDEC

[0029.731] I> Size of crypto header is 8192

[0029.736] I> Size of crypto header is 8192

[0029.741] I> BCH of NVDEC read from storage

[0029.746] I> BCH address is : 0x800fe000

[0029.751] I> NVDEC header integrity check is success

[0029.756] I> Binary magic in BCH component 0 is NDEC

[0029.762] I> component binary type is 7

[0029.766] I> Size of crypto header is 8192

[0029.784] I> NVDEC binary is read from storage

[0029.789] I> NVDEC binary integrity check is success

[0029.795] I> Binary NVDEC loaded successfully at 0x80000000 (0x46000)

[0029.806] I> Task: Load tsec-fw

[0029.809] I> TSEC-FW load support not enabled

[0029.814] I> Task: GPIO interrupt map

[0029.818] I> Task: SC7 context save

[0029.822] I> Task: Load MB2/Applet/FSKP

[0029.826] I> Loading MB2

[0029.829] I> Slot: 0

[0029.832] I> Binary[6] block-100663296 (partition size: 0x80000)

[0029.839] I> Binary name: MB2

[0029.842] I> Size of crypto header is 8192

[0029.847] I> Size of crypto header is 8192

[0029.852] I> BCH of MB2 read from storage

[0029.857] I> BCH address is : 0x8007e000

[0029.862] I> MB2 header integrity check is success

[0029.867] I> Binary magic in BCH component 0 is MB2B

[0029.873] I> component binary type is 6

[0029.877] I> Size of crypto header is 8192

[0029.901] I> MB2 binary is read from storage

[0029.907] I> MB2 binary integrity check is success

[0029.912] I> Binary MB2 loaded successfully at 0x80000000 (0x691f0)

[0029.920] I> Task: Map CCPLEX SHARED carveout

[0029.926] I> Task: Prepare MB2 params

[0029.931] I> BR-BCT Boot Chain Fields

[0029.935] I>    u32_non_gpio_select_boot_chain  : 0

[0029.940] I>    u32_num_boot_chains             : 2

[0029.945] I>    bf_bl_gpio_select_boot_chain_1b : 0

[0029.951] I> Task: Dram ecc test

[0029.954] I> Task: Misc NV security settings

[0029.959] I> NVDEC sticky bits programming done

[0029.964] I> Successfully powergated NVDEC

[0029.968] I> Task: Disable/Reload WDT

[0029.972] I> Task: Program misc carveouts

[0029.977] I> Program IPC carveouts

[0029.985] I> SLCG Global override status := 0x0

[0029.990] I> MB1: MSS reconfig completed

I> MB2 (version: 0.0.0.0-t234-54845784-4d0906e6)

I> t234-A01-1-Silicon (0x12347)

I> Boot-mode : RCM BOOT

I> Emulation:

I> Entry timestamp: 0x01ca1807

I> Regular heap: [base:0x40040000, size:0x10000]

I> DMA heap: [base:0x270000000, size:0x800000]

I> Task: ARI update carveout TZDRAM (0x50002034)

I> Task: Enable hot-plug capability (0x50028064)

I> Task: Set blob address (0x5000200c)

I> Task: PSC mailbox init (0x500178b0)

I> Task: Crypto init (0x5000675c)

I> Task: Enable GP-SE clock (0x50002198)

I> Task: DICE Identity init (0x5001af00)

I> DICE is not enabled.

I> Task: Measured Boot init (0x5001b674)

I> Task: I2C register (0x50001ff8)

I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001fe0)

I> Task: Program CBB PCIE AMAP regions (0x5001ac14)

I> Task: Load and authenticate registered FWs (0x5001e198)

I> Task: Load AUXP FWs (0x50027c04)

I> Successfully register SPE FW load task with MB2 loader

I> Skipping SCE FW load

I> Successfully register RCE FW load task with MB2 loader

I> Successfully register DCE FW load task with MB2 loader

I> Unpowergating APE

I> Unpowergate done

I> Successfully register APE FW load task with MB2 loader

I> Skipping FSI FW load

I> Successfully register XUSB FW load task with MB2 loader

I> spe: Authentication Finalize Done

I> Binary spe loaded successfully at 0x26f200000

I> rce: Authentication Finalize Done

I> Binary rce loaded successfully at 0x26ef00000

I> dce: Authentication Finalize Done

I> Binary dce loaded successfully at 0x276000000

I> ape: Authentication Finalize Done

I> Binary ape loaded successfully at 0x26fc00000

I> xusb: Authentication Finalize Done

I> Binary xusb loaded successfully at 0x26f300000

I> Task: Carveout setup (0x500208f8)

I> Program remaining OEM carveouts

I> Task: Enable FSI VMON (0x50017280)

I> Task: Restore XUSB sec (0x50001ef8)

I> Task: Enable FSI SE clock (0x50017d0c)

I> Task: Initialize SBSA UART CAR (0x500020fc)

I> Task: Initialize CPUBL Params (0x50018cf8)

I> CPUBL-params @ 0x272000000

I> Task: Prepare eeprom data (0x50018ac4)

I> Task: Unpowergate APE (0x50018474)

W> mb2_unpowergate_ape: skip! APE is in unpowergated state

I> Task: OEM firewalls (0x50024d68)

I> OEM firewalls configured

I> Task: Powergate APE (0x500185e8)

I> Powergating APE

I> Powergate done

I> Task: OEM firewall restore saved settings (0x500251bc)

I> Task: Unhalt AUXPs (0x50027e6c)

I> Unhalting SPE..

I> Enabling combined UART

▒▒▒▒spe: early_init

▒▒▒▒vic initialized

▒▒▒▒tsc initialized

▒▒▒▒aon lic initialized

▒▒▒▒spe: tag is 5243985d1b1eb3f06fac6d36bd7e74ac

▒▒▒▒spe: SafeRTOS v8.4

▒▒▒▒spe: init

▒▒▒▒scheduler initialized

▒▒▒▒aon hsp initialized

▒▒▒▒tag initialized

▒▒▒▒tcu initialized

▒▒▒▒bpmp ipc initialized

▒▒▒▒spe: late init

▒▒▒▒cpu_nic clock initialized

▒▒▒▒apb clock initialized

▒▒▒▒pm initialized

▒▒▒▒bpmp hsp initialized

▒▒▒▒top1 hsp initialized

▒▒▒▒ccplex ipc initialized

▒▒▒▒spe: start scheduler

▒▒▒▒

    I> Task: Trigger mailbox for PSC-BL1 exit (0x50017930)

I> Sending opcode 0x4d420802 to psc

▒▒INFO: Entering psc_monitor_init!

INFO: GSC22 BOM:0x278002000 SIZE:0x1000000 CLIENT_ACCESS1:00180000

INFO: PSCFW BUILD VERSION: 8a33b23-73b589c-8a15f76-rel-t234

INFO: mstatus:0xa00000808

INFO: Supervisor entry_point:c108c00

▒▒I> Received ACK from psc

I> Tas▒▒INFO: MONITOR: user task addr:0x278022000, blob offset:0x00020000

INFO: MONITOR: populated user images:13

INFO: mret to Supervisor!

INFO: psc supervisor init.

INFO: psc_irq_init...

INFO: enter idle task.

▒▒

  bpmp: socket 0

bpmp: base binary md5 is 925eece486b7c46d91aa449178b5d322

bpmp: combined binary md5 is cedb24d07defeef07ea9c6fb63a683a6

bpmp: firmware tag is cedb24d07defeef07ea9-925eece486b

initialized vwdt

initialized mail_early

initialized fuse

initialized vfrel

initialized hwwdt

initialized adc

fmon_populate_monitors: found 199 monitors

initialized fmon

initialized mc

initialized reset

initialized uphy_early

initialized emc_early

471 clocks registered

initialized clk_mach

initialized clk_cal_early

initialized clk_mach_early_config

initialized io_dpd

initialized soctherm

initialized regime

initialized i2c

vrmon_dt_init: vrmon node not found

vrmon_chk_boot_state: found 0 rail monitors

initialized vrmon

initialized regulator

initialized avfs_clk_platform

initialized powergate

initialized dvs

initialized clk_mach_config

initialized pm

suspend progress: 0x0

initialized suspend

initialized strap

initialized mce_dbell

▒▒k: Start secure NOR provision (0x5001aa2c)

I> Task: Load FSI keyblob (0x50017d54)

I> ▒▒initialized emc

initialized emc_mrq

▒▒Task: Unhalt AUXPs (0x50027e74)

I> ▒▒initialized clk_cal

initialized uphy_dt

initialized uphy_mrq

HSIO UPHY reset has been de-asserted 0x0

initialized uphy

initialized pg_late

initialized pg_mrq_init

swdtimer_init: reg polling start w period 47 ms

initialized swdtimer

initialized hwwdt_late

initialized bwmgr

initialized thermal_host_trip

initialized thermal_mrq

initialized oc_mrq

initialized reset_mrq

initialized mail_mrq

initialized fmon_mrq

initialized clk_mrq

initialized avfs_mrq

initialized i2c_mrq

initialized tag_mrq

initialized bwmgr_mrq

initialized console_mrq

missing prod DT calibration data for 199 fmons

initialized clk_sync_fmon_post

▒▒SCE unhalt skipped

I> Unh▒▒initialized clk_cal_late

initialized noc_late

initialized cvc

▒▒alting RCE

I> RCE unhalt success▒▒[     4.252829] Camera-FW on t234-rce-safe started

TCU early console enabled.

▒▒initialized avfs_clk_mach_post

initialized avfs_clk_platform_post

initialized cvc_late

WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/2 have not matching zones 0/1

WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zone list sizes 1/3

WARNING @ [platform/drivers/rm/rm.c]: shared rails 0/3 have not matching zones 0/2

WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/0 have not matching zones 1/0

WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zone list sizes 1/3

WARNING @ [platform/drivers/rm/rm.c]: shared rails 2/3 have not matching zones 1/2

WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zone list sizes 3/1

WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/0 have not matching zones 2/0

WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zone list sizes 3/1

WARNING @ [platform/drivers/rm/rm.c]: shared rails 3/2 have not matching zones 2/1

initialized rm

initialized console_late

handling unreferenced clks

enable can1_core

enable can1_host

enable can2_core

enable can2_host

enable pwm3

enable mss_encrypt

enable maud

enable pllg_ref

enable dsi_core

enable aza_2xbit

enable usb2_trk

enable xusb_ss_dev

enable xusb_fs_dev

enable xusb_falcon

enable dsi_lp

enable xusb_core_mux

enable xusb_core_dev

clk_check_max_rates: pex1_c6_core rate 500000000 > max 250000000

clk_check_max_rates: pex2_c7_core rate 500000000 > max 250000000

clk_check_max_rates: pex2_c8_core rate 500000000 > max 250000000

clk_check_max_rates: pex2_c9_core rate 500000000 > max 250000000

clk_check_max_rates: pex2_c10_core rate 500000000 > max 2▒▒[     4.406170] Camera-FW on t234-rce-safe ready SHA1=8676d22a (crt 1.490 ms, total boot 154.936 ms)

▒▒50000000

clk_check_max_rates: pex0_c0_core rate 500000000 > max 250000000

clk_check_max_rates: pex0_c1_core rate 500000000 > max 250000000

clk_check_max_rates: pex0_c2_core rate 500000000 > max 250000000

clk_check_max_rates: pex0_c3_core rate 500000000 > max 250000000

clk_check_max_rates: pex0_c4_core rate 500000000 > max 250000000

clk_check_max_rates: pex1_c5_core rate 500000000 > max 250000000

initialized clk_mach_post

initialized pg_post

initialized regulator_post

initialized profile

initialized mrq

initialized patrol_scrubber

initialized cacmon

initialized extras_post

bpmp: init complete

▒▒ful

I> DCE unhalt successful

I> APE unhalt skipped

I> FSI unhalt skipped

I> Task: Load CPUBL (0x50018e1c)

I> Task: Load TOS (0x50019580)

I> Task: Load and authenticate register▒▒

                                         DCE: FW Boot Done

▒▒ed FWs (0x5001e198)

I> MB2-params @ 0x40060000

I> cpubl_params: nsdram: carveout: 1, encryption: 1

I> NSDRAM carveout base: 0x80000000, size: 0x1eea70000

I> cpubl: Authentication Finalize Done

I> Binary cpubl loaded successfully at 0x26e600000

I> tos: Authentication Finalize Done

I> Binary tos loaded successfully at 0x27fdeeb70

I> Relocating OP-TEE dtb from: 0x27feff7c0 to 0x27c000020, size: 0x2106

I> [0] START: 0x80000000, SIZE: 0x1eea70000

I> [1] START: 0x272000000, SIZE: 0x2000000

I> Setting NS memory ranges to OP-TEE dtb finished.

I> eks: Authentication Finalize Done

I> Binary eks loaded successfully at 0x270000200

I> EKB detected (length: 0x410) @ VA:0x270000200

I> Task: Prepare TOS params (0x500194f8)

I> Setting EKB blob info to OPTEE dtb finished.

I> Setting OPTEE arg3: 0x27c000020

I> Task: Disable MSS perf stats (0x50027f00)

I> Task: Program display sticky bits (0x50027e7c)

I> Task: SMMU external bypass disable (0x50017894)

I> Task: SMMU init (0x500177b0)

I> Task: Program GICv3 registers (0x50027fa0)

I> Task: Audit firewall settings (0x50024fbc)

I> MB2 finished



▒▒NOTICE:  BL31: v2.6(release):346877e39

NOTICE:  BL31: Built : 12:32:40, Aug  1 2023

I/TC: Physical secure memory base 0x27c040000 size 0x3fc0000

I/TC:

I/TC: Non-secure external DT found

I/TC: OP-TEE version: 3.21 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Aug  1 19:39:55 UTC 2023 aarch64

I/TC: WARNING: This OP-TEE configuration might be insecure!

I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html

I/TC: Primary CPU initializing

I/TC: Test OEM keys are being used. This is insecure for shipping products!

I/TC: Primary CPU switching to normal world boot

▒▒

  Jetson UEFI firmware (version 4.1-33958178 built on 2023-08-01T19:34:02+00:00)

































































































































































▒▒E/TC:?? 00 get_rpc_alloc_res:645 RPC allocation failed. Non-secure world result: ret=0xffff0000 ret_origin=0

E/LD:   init_elf:486 sys_open_ta_bin(bc50d971-d4c9-42c4-82cb-343fb7f37896)

E/TC:?? 00 ldelf_init_with_ldelf:131 ldelf failed with res: 0xffff000c

▒▒

















































































































































▒▒Unhandled Exception in EL3.

x30            = 0x0000000050000d00

x0             = 0x0000000000000000

x1             = 0x00000000be000011

x2             = 0x0000000000000000

x3             = 0x0000000000000011

x4             = 0x0000000000100000

x5             = 0x000000026e9fe588

x6             = 0x0000000001000000

x7             = 0x0000000001000000

x8             = 0x00180301d3719223

x9             = 0x000000005001c380

x10            = 0x55aaa055071dbd35

x11            = 0x55aa8255ce1abfe1

x12            = 0x0a0341d0000c0102

x13            = 0x0004ff7f00000000

x14            = 0x0000000219e2aba8

x15            = 0x0000000219e2ab10

x16            = 0x000000023c5a403c

x17            = 0x000000001664d06b

x18            = 0x000000023c4bb2f0

x19            = 0x000000005001cec0

x20            = 0x0000000000000000

x21            = 0x0000000000000000

x22            = 0x0000000000000000

x23            = 0x0000000000000000

x24            = 0x0000000000000000

x25            = 0x0000000000000000

x26            = 0x0000000000000000

x27            = 0x0000000000000000

x28            = 0x0000000000000000

x29            = 0x0000000000000000

scr_el3        = 0x000000000003073d

sctlr_el3      = 0x00000000b0cd183f

cptr_el3       = 0x0000000000000000

tcr_el3        = 0x0000000080823518

daif           = 0x00000000000002c0

mair_el3       = 0x00000000004404ff

spsr_el3       = 0x00000000600003c9

elr_el3        = 0x000000023c4b5280

ttbr0_el3      = 0x0000000050026ac1

esr_el3        = 0x00000000be000011

far_el3        = 0x0000000000000000

spsr_el1       = 0x0000000000000000

elr_el1        = 0x0000000000000000

spsr_abt       = 0x0000000000000000

spsr_und       = 0x0000000000000000

spsr_irq       = 0x0000000000000000

spsr_fiq       = 0x0000000000000000

sctlr_el1      = 0x0000000030d00800

actlr_el1      = 0x0000000000000000

cpacr_el1      = 0x0000000000300000

csselr_el1     = 0x0000000000000000

sp_el1         = 0x0000000000000000

esr_el1        = 0x0000000000000000

ttbr0_el1      = 0x0000000000000000

ttbr1_el1      = 0x0000000000000000

mair_el1       = 0x0000000000000000

amair_el1      = 0x0000000000000000

tcr_el1        = 0x0000000000000000

tpidr_el1      = 0x0000000000000000

tpidr_el0      = 0x0000000080000000

tpidrro_el0    = 0x0000000000000000

par_el1        = 0x0000000000000800

mpidr_el1      = 0x0000000081000000

afsr0_el1      = 0x0000000000000000

afsr1_el1      = 0x0000000000000000

contextidr_el1 = 0x0000000000000000

vbar_el1       = 0x0000000000000000

cntp_ctl_el0   = 0x0000000000000005

cntp_cval_el0  = 0x0000000010b9ce10

cntv_ctl_el0   = 0x0000000000000000

cntv_cval_el0  = 0x0000000000000000

cntkctl_el1    = 0x0000000000000000

sp_el0         = 0x000000023c4bb2f0

isr_el1        = 0x0000000000000040

cpuectlr_el1   = 0xa000000b40543000

gicd_ispendr regs (Offsets 0x200 - 0x278)

 Offset:                        value

0000000000000200:               0x0000000000000000

0000000000000204:               0x0000000000000000

0000000000000208:               0x0000000000000000

000000000000020c:               0x0000000000000000

0000000000000210:               0x0000000000000000

0000000000000214:               0x0000000000000000

0000000000000218:               0x0000000000010000

000000000000021c:               0x0000000000020000

0000000000000220:               0x0000000000000000

0000000000000224:               0x0000000000000000

0000000000000228:               0x0000000000000000

000000000000022c:               0x0000000000000000

0000000000000230:               0x0000000000000000

0000000000000234:               0x0000000000000000

0000000000000238:               0x0000000000000000

000000000000023c:               0x0000000000000000

0000000000000240:               0x0000000000000000

0000000000000244:               0x0000000000000000

0000000000000248:               0x0000000000000000

000000000000024c:               0x0000000000000000

0000000000000250:               0x0000000000000000

0000000000000254:               0x0000000000000000

0000000000000258:               0x0000000000000000

000000000000025c:               0x0000000000000000

0000000000000260:               0x0000000000000000

0000000000000264:               0x0000000000000000

0000000000000268:               0x0000000000000000

000000000000026c:               0x0000000000000000

0000000000000270:               0x0000000000000000

0000000000000274:               0x0000000000000000

0000000000000278:               0x0000000000000000

000000000000027c:               0x0000000000000000

Does anyone can help us?